TOUCH UP SPRAY 2C POWDERCOLLECTION 400ML

No. d'article 230PPAPRAL
Laque liquide bi-composant en aérosol de 400 ml, spécialement élaborée pour les retouches ou le laquage sur laquage poudre ou PVC. Disponible dans toutes les teintes RAL(mat 30%, satin 70% en brillant 85%) et tous les couleurs PVC et laque poudre.
Prix
€ 0,00
prix par pièce
Taxes excl.
Ce produit ne peut être commandé en ce moment.
Surface
0,7 to 1 m² per spraycan
2 components
For applications with high quality requirements & high UV protection and chemical resistance.
Quick drying
Dust dry after 30 minutes
Manageable after 4 hours
Completely dry after 24-30h.
Pre-treat
Direct adhesion on PVC and powder coated objects. Pre-treatment with the Duthoo Epoxy Primer or Universal Primer on steel, galva, stainless steel, aluminium and non-ferrous.

Technical properties

  • Direct adhesion on PVC and powder paint, after suitable preparation !
  • Pre-treatment with the Duthoo Epoxy Primer or Universal Primer on steel, galva, stainless steel, aluminium and non-ferrous, after suitable preparation of the substrate.
  • Yield: 0,7-1 m² per spraycan for 30/40μ dry layer thickness.
  • Quick drying
  • Does not turn yellow
  • Strong coverage power
  • Dust dry after 30 minutes - Manageable after 4 hours. - Completely dry after 24-30h.
  • Scratch resistant.
  • Professional use
  • Shelf life: 1 year in unopened packaging. Storage according to the General requirements for aerosols.
  • Keep away from frost, humidity and warmth.
  • Flammable.

Use

SPRAYCAN PREPARATION:

  • Shake well - 2 minutes
  • 1/ Remove lid at bottom of spraycan. 2/ Remove the ring from the interior of the lid. 3/ Put the ring through the opening of the valve on the bottom of the spraycan. Then turn the ring 360 °.
  •  Now the hardener is in the varnish. Then, shake the spraycan for 3 to 4 minutes to mix the varnish and the hardener.
  • Life span: 48 hours after mixing.

METHOD OF USE:

  • The surfaces must be free of any impurities.
  • Sanding with Duthoo Abranylon and degreasing of non-ferrous metals with the Etching Promotor.
  • Apply primer and paint with the color of choice.
  • Sanding and applying primer on powdercoated surfaces and PVC is not neccessary after degreasing with the Etching Promotor and afterwards a waiting time before painting of at least 15 min and within 3h.
  • Spray at a distance of 20-25 cm. Apply in several thin wet coats until the desired color is reached.
  • The spraycan contains 1 nozzle: 1 flat jet
  • Avoid use at temperature below 15 ° c and in extreme heat or humidity.

Packaging

400 ML Spraycan
    Chargement en cours
    Chargement en cours